Product Description:

Normal door skins are laminate that are pasted on doors,wardrobe made from plywood,MDF etc making the entry point of your place itself look good. Besides giving nice look trustable quality they are cost effective and economically viable.

NOTE -THEY ARE NOT INTENDED FOR USE TO DIRECT EXPOSURE TO SUNLIGHT FOR LONG TIME.

Care and Maintainance:

HPL is extremely durable and needs minimal care due to its non porous surface. Clean the surface simply using water and dry it with a paper tissue or a soft cloth. If the impurities cannot be removed, use a common cleaning agent without abrasive agents. Afterwards clean the surface with water and dry it.Although it being non porous and resistant to common stains it is advised that the stains be wiped off immedieatly .

Staining Caused by Paraffin or Wax Residue :

Paraffin or wax residue should first be removed mechanically using a plastic or wooden spatula to avoid scratching the surface. Cover any remaining residue with an absorbent paper and briefly apply heat with a hot iron.

Staining caused by water soluble paints,varnishes and adhesive :

Fresh stains can usually be removed with warm water. Dried residue can be removed with solvents such as ethanol, acetone, mineral spirits, lacquer thinner, or nail polish remover. The corresponding recommendations of the manufacturer should also be observed.

Staining Caused by Solvent-Based Paints, Varnishes and Adhesives :

Both fresh stains dried stain residue can usually be removed with solvents. Suitable solvents are ethanol, acetone, mineral spirits, lacquer thinner, or nail polish remover. Follow the recommendations of the solvent manufacturer.

NOTE - All the information given regarding care and maintenance are best known to our knowledge but do not guarantee anything.